Free plans for Letov S.239

Added by: RC Plane PosterType: ScaleAutor: A.ZaichikovWingspan: 1000Flying Weight: 300Download Free Plans RC Model (577)Rewiev:

1. Linden 4x4mm rail section — 6 pcs. + Front edge of asymmetrical 7h12 — 1m
2. Balsa 2.5mm — 2 pages
3. Balsa 4mm — 0.5 page
4. Balsa 6mm — used to trim
5. Balsa 10mm — 2 small pruning in the wingtips. It is possible to replace polystyrene foam.
6. Balsa 1mm — 2.5 sheet
7. The covering film silver (white) and purple (red) — just did not measure, but there is still a lot of rolls.
8. The wire cross-section 1.5mm chassis and synchronizer PB — a little less than a meter.
9. Plastic landing gear was selected in the store, "Wright Brothers" in weight and size of some or microhelicopter copter. 4 pieces — set used alone.
10. Wheels chassis front and rear.
11. Loop in ailerons — 5 pieces.
12. The hinges in the tail — 6pc.
13. pig — 4 pcs.
14. Catches wheels — 3pc.
15. Traction — 3pc.
16. Screw 8×4
17. Catches rods.

Electronics:
1. Motor Turnigy 2730-1500
2. Servo HK-S0361
3. Receiver Spectrum ARP6210 only satellite unbuckled unnecessary.
4. Regulator Turnigy Plush 12A
5. The batteries or 2S 500mah 850mah
6. The wire (about 1m) and connectors.

http://rc-plans.com/catalog/item33.html